| Availability: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Custom Split Lock Washers are open-ring spring washers with a visible split and offset ends. The supplied images show helical split washer forms in different diameters and finishes. Hardware-SP supplies drawing-defined split lock washers for OEM fastener assemblies, reviewing the ring section, inside diameter, outside diameter, free height, material, finish, inspection, and packing requirement from the customer drawing or sample. Hardware-SP manufactures these parts to customer drawings, CAD files, or samples, with geometry, material, surface treatment, inspection, and packing reviewed for the intended OEM assembly. | |||||||||
Hardware-SP manufactures custom split lock washers for bolted assemblies that require a defined open-ring, helical washer form. The split and offset ends visible in the images distinguish this product from a flat washer. We work from drawings, CAD files, or samples so the washer can be specified around the fastener, joint stack, installation method, and service environment. Upload Drawing for Quote to start the review.
A split lock washer has an open ring with a formed profile rather than a fully flat bearing face. Its inside diameter, outside diameter, section shape, thickness, free height, gap, and end form must suit the intended screw or bolt. Catalog sizes may not match the space available, the mating material, or a drawing-controlled assembly, which is why custom geometry matters.
For other drawing-made washer profiles, see Custom Washers.
1) The nominal fit can be matched to the specified screw or bolt.
2) Ring section, thickness, and free height can be set to the drawing.
3) The gap and end form can be adjusted for assembly clearance.
4) Surface treatment and packing can be selected around corrosion, appearance, and handling requirements. The completed joint should be validated against its actual preload and operating conditions.
For other drawing-made washer profiles, see Custom Washers.
Depending on the drawing, material, and order quantity, manufacturing may include material preparation, blanking or ring forming, splitting, helical forming, deburring, cleaning, and surface treatment. Heat treatment or other operations are drawing-dependent and are not assumed from the image. The selected route must protect the ring profile and leave the split ends appropriate for the intended assembly.
For related formed-part production, review Metal Stamping Parts.
The mating fastener and contact materials should be provided with the RFQ. State the bolt or screw size, required washer seating condition, available space, any coating on the mating surfaces, and whether the washer is installed by hand or automated equipment. These points help define the ID, OD, section, gap, and free-height relationship before production is planned.
Split lock washers are used across equipment, brackets, panels, electrical assemblies, fixtures, machine covers, service parts, and other OEM products. They are selected where a spring-style open ring is required by the assembly design. A custom washer can also support special packing, finish, or dimensional requirements when a stocked part does not fit the specified joint.
Upload Drawing for Quote with a drawing, CAD file, or sample, material request, quantity, finish, nominal fastener size, ID, OD, thickness or section, free height, gap/end details, inspection points, packing requirement, and destination. If a standard reference is required, identify it on the drawing. For critical performance requirements, include the joint-level acceptance method rather than relying on a washer image alone.
Item | Project reference |
Geometry | Split ring, helical form, and drawing-defined end condition |
Size | Custom inside diameter, outside diameter, section, gap, and free height |
Material | Drawing-dependent |
Surface | Drawing-dependent custom options |
Inspection | Dimensions, profile, split ends, burr condition, and finish to drawing |
Order type | Prototype, trial batch, or repeat OEM production |
Packing | Drawing-dependent or customer-specified |
Yes. Provide a drawing or sample with the required ID, OD, section, free height, gap, material, and quantity.
State the gap, end profile, installation clearance, and any orientation requirement with the mating fastener.
Yes. Include the desired finish and environment so the surface treatment can be reviewed with the washer geometry.
A drawing or sample, material, quantity, finish, critical dimensions, fastener information, inspection needs, packing, and destination are the best starting inputs.