| Availability: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Custom Slotted Washers are flat metal parts with a round, square, or rectangular outer profile and a drawing-defined slot or opening. The supplied images show square and rectangular versions with long slots and round holes. Hardware-SP manufactures them for OEM assemblies where adjustment, fastener clearance, bearing area, and fit must be defined from the actual mating parts. | |||||||||
Custom slotted washers help when a fixed round hole cannot support the required adjustment or installation position. The slot can allow controlled movement before final tightening, while the outer profile covers the bearing area. Hardware-SP supplies drawing-defined parts. Upload Drawing for Quote with the washer and mating-fastener orientation.
1) Slot length controls the available adjustment travel.
2) Slot width must fit the stated bolt or screw clearance.
3) Outside length and width define the bearing footprint.
4) Thickness and edge condition affect the joint stack and contact face.
The images show both square and rectangular options, but final geometry should follow the installed assembly.
For purchasing, state material, quantity, finish, critical dimensions, inspection, packing, and destination so supplier quotations cover the same delivered condition. For engineering, include the bolt or screw, panel, slot direction, clamped surface, and any adjustment range. These inputs reduce assumptions that can cause a low quote to describe a different part.
A typical route may include blanking the outside profile, piercing the round hole or slot, deburring, cleaning, and specified surface treatment. Material, thickness, profile, demand, and burr-sensitive surfaces determine the route. Where repeat production is planned,.
For a repeat flat-part route, consult the Metal Stamping page before tooling scope is finalized.
Slotted metal washers can be square, rectangular, oval, or another drawing-defined profile. Slotted square washers and slotted rectangular washers may be used where the bearing area must align with straight edges. Rectangular washers and square plate washers can also be specified with a round hole when adjustment is not required. Custom metal washers should be defined by function, not only by the product photo.
Upload Drawing for Quote with a PDF, CAD model, or sample; material; quantity; outer profile; slot or hole dimensions; thickness; finish; tolerances; mating-part details; inspection needs; packing; and destination. These details let purchasing compare quotations fairly and let engineering confirm the released washer will fit the actual joint.
1) Confirm the washer can span the panel slot or opening without pull-through.
2) Identify the direction in which adjustment is needed before tightening.
3) Name the face that must remain flat and free of burrs.
4) Check whether the washer must resist movement or simply provide clearance.
These points give engineers a clear drawing-review checklist and help buyers avoid comparing incomplete quotations.
A catalog washer may be appropriate when its profile, hole, material, and thickness fit without compromise. When the joint needs an unusual slot, bearing area, or outer shape, a drawing-defined option can reduce assembly workarounds.
For a broader range of drawing-defined washer forms, visit Custom Washers and match the page to the actual joint requirement.
Item | Project reference |
Geometry | Custom square, rectangular, or drawing-defined profile |
Opening | Round hole, slotted hole, or drawing-defined opening |
Material | Drawing-dependent |
Thread | Not applicable unless stated on drawing |
Surface | Drawing-dependent custom options |
Inspection | Profile, slot or hole, thickness, edge, and finish to drawing |
Order type | Prototype, trial batch, or repeat OEM production |
Packing | Drawing-dependent or customer-specified |
Yes. Provide the slot length, width, end radius, position, and required adjustment range.
Yes. State the bearing area, bolt clearance, and outer profile on the drawing.
Material, thickness, profile, opening geometry, finish, quantity, tolerance, inspection, packing, and destination all affect the supplied condition.
Include the mating bolt or screw, panel view, installed orientation, and critical contact surface with the RFQ.